Silent Naga – Bakugan 3D Printer Model
The file 'Silent Naga – Bakugan 3D Printer Model' is (stl) file type, size is 4.2MB.
The file 'Silent Naga – Bakugan 3D Printer Model' is (stl) file type, size is 4.2MB.
Silent Naga, fully functional
Update 2024-01-14: FIXED THE SUB WINGS, SILENT NAGA SHOULD CLOSE PROPERLY NOW, SORRY ABOUT THE MIX UP
Update 2024-01-10: Added Left and Right Horn - Through, they have the hole go through all the way so longer pins can be used if needed
I used a Wavern's springs. You will be missing some screws and pins. I used watch pins and laptop screws. pin size is set to 1.6mm, though I recommend either 1.4mm or 1.5mm pin size to give some clearance. Note: the right horn pin hole is slightly small to help fit the smooth side of a pin
| Base.stl | 1.7MB | |
| Body.stl | 1.5MB | |
| Head.stl | 1.6MB | |
| Inner_Hook.stl | 138.8KB | |
| Left_Foot.stl | 406.1KB | |
| Left_Horn.stl | 206.4KB | |
| Left_Horn_-_Through.stl | 206.7KB | |
| Left_Joint.stl | 147.7KB | |
| Left_Sub_Wing.stl | 809.0KB | |
| Left_Wing.stl | 1.0MB | |
| Neck.stl | 136.2KB | |
| Right_Foot.stl | 406.1KB | |
| Right_Horn.stl | 205.2KB | |
| Right_Horn_-_Through.stl | 211.6KB | |
| Right_Joint.stl | 147.7KB | |
| Right_Sub_Wing.stl | 809.0KB | |
| Right_Wing.stl | 918.0KB | |
| Spike.stl | 167.9KB |
![Darkus Gauntlet[Bakugan Battle Brawlers] 3D Printer Model](https://cdn.3axis.co/assets/16/ea/4d/a2/16ea4da2-7b18-4b25-a12c-b282782a24b6/images/5dea2511-a24a-4807-9a18-5711c43594d0_thumb.jpg)
