Signum CXY150R2 Printer 3D Printer Model
The file 'Signum CXY150R2 Printer 3D Printer Model' is (stl,zip,STL,dxf,stp) file type, size is 14.9MB.
The file 'Signum CXY150R2 Printer 3D Printer Model' is (stl,zip,STL,dxf,stp) file type, size is 14.9MB.
Build volume: 150x150x145 mm
Print/travel speed: >150 mm/s
Approximate building cost: up to $250 (acrylic case, 6 mm plywood also okay).
Most likely you will not find a heater with apropriate size (182x202 mm), I use aluminium alloy plate with 12v 100watt silicone heater pad (180x180 mm) glued to the bollom of the plate.
Marlin 1.0.2 firware configured for this printer: https://github.com/robotsrulz/Marlin
I didn't work on full BOM and assembly instructions, it's mostly the same as in original project although you will need more short hex head bolts and nyloc nuts for rails and pulleys. If you have any difficulties assemblyng the projects drop me a message, I will answer shortly.
Test print video: https://www.youtube.com/watch?v=sY8cQZ5xOEQ
Complete printer assembly (STEP / IGES, Fusion 360, DesignSpark Mechanical): https://grabcad.com/library/signum-cxy150r2-2
Other STL files which could be used for building the printer: http://www.thingiverse.com/thing:1165682/#files
| body.stl | 131.5KB | |
| cura2.zip | 496.0KB | |
| CXY150R2_SPOOL-HOLDER-60x30.STL | 30.7KB | |
| idler_v2.stl | 135.9KB | |
| lasercut2.dxf | 1021.2KB | |
| SIGNUM_CXY150R2-update2.stp | 48.6MB | |
| SNS_BELT-MOUNT-1_fixed.stl | 56.1KB | |
| SNS_BELT-MOUNT-2_fixed.stl | 24.6KB | |
| SNS_E3Dv6-HOTEND-MOUNT_fixed.stl | 52.1KB | |
| SNS_FLANGE-NUT-HOLDER-8mm_LEADSCREW.stl | 198.4KB | |
| SNS_MOUNT-AXIS-Z-10mm.stl | 108.4KB | |
| SNS_MOUNT_Y_MICRO-SWITCH-R2.stl | 75.7KB | |
| SNS_X-CARRIAGE-4R2.stl | 488.8KB | |
| SNS_XY-CARRIAGE-4R2.stp | 11.3MB | |
| SNS_Y-CARRIAGE-4R2.stl | 1.3MB | |
| SNS_Z-CARRIAGE-10mm_RODS-8mm_LEADSCREW.stl | 547.8KB | |
| SPJP150_MOUNT-BED-FRONT.STL | 36.4KB | |
| SPJP150_MOUNT_MICRO-SWITCH_fixed.STL | 42.2KB | |
| xy_plane_corexy_rails2.dxf | 759.3KB |
