Signal/Wiper Stalk Bracket For TR-One Front Mount 3D Printer Model
The file 'Signal/Wiper Stalk Bracket For TR-One Front Mount 3D Printer Model' is (f3d,step,stl) file type, size is 17.9MB.
The file 'Signal/Wiper Stalk Bracket For TR-One Front Mount 3D Printer Model' is (f3d,step,stl) file type, size is 17.9MB.
For mounting Sim Rig Direct (modified Dongfeng, available on Ebay) indicator/wiper stalks to a Trak Racer TR-One front mount. Clearances between everything are entirely dependent on your setup, so unless you are using the same everything, this may need significant modification to work for you. Pictured with a Simagic Alpha U wheelbase and a Simagic GTSC on a Simagic QR, and 330mm and 350mm Nardi Deep Corns on NRG QRs, for reference of distance between stalks and wheel.
STEP and F3D files are included for modification for other types of front mounts. If using Fusion, this may at least be helpful as a guide and some sketches to create something different for other front mount bolt patterns.
Note that the stalks will need relocation of their USB control boards to the bottom of the unit, or someplace other than the back. Do this carefully, and add hot glue to the connector pinout and wires, as they're fragile and may touch the DD front mount.
| blinkermount2_v9.f3d | 17.6MB | |
| blinkermount2_v9.step | 434.4KB | |
| blinkermount2_v9.stl | 427.0KB |
