Everyone is here! (at least the ones that matter :-)
Captain America, Captain Marvel, Superman, Batman, Wonderwoman and some other graphic symbols...
Printed using 0.2mm layers.
The simplest way to achieve the 3 color effect is by pausing the printed at a selected layer, use the controls only!, move the printing head up and to the side, then retract the filament (remember, with the controls only!!! - no touching) replace to another color , extrude a bit to get the flow going and just resume the print.
Behind the scenes: https://www.youtube.com/watch?v=Afm_5TcuHp0&list=PLue-ZfgizoWRwLFt-fFj29QZDPb2K7ExQ
I've included 3mf files that might help with multicolor prints.
The design is inspired by https://www.thingiverse.com/thing:1251975
| GMBL_New_Alien.3mf | 529.9KB | |
| GMBL_New_Alien.stl | 1.0MB | |
| GMBL_New_BatMan.stl | 1.2MB | |
| GMBL_New_CapAmerica.3mf | 570.2KB | |
| GMBL_New_CapAmerica.stl | 1.1MB | |
| GMBL_New_CapMarvel.3mf | 989.2KB | |
| GMBL_New_CapMarvel.stl | 1.3MB | |
| GMBL_New_Generic.stl | 1.0MB | |
| GMBL_New_Generic1.stl | 1.0MB | |
| GMBL_New_Nuclear.3mf | 709.1KB | |
| GMBL_New_Nuclear.stl | 1.2MB | |
| GMBL_New_SuperMan.stl | 1.2MB | |
| GMBL_New_WonderWoman.stl | 1.1MB | |
| WonderwomanLogo1.stl | 1.3MB |
