Being an introvert AND an HSP, I often find myself in the need to let everyone around me know, that I need me-time without dirsturbance, without having to spend energy on getting people to understand.

So I made a sign to hang on my office door and decided to share it.

The sign can be printed in one go and then painted if you wish, or in parts.
The frame and text are included in the base, so if you want a different color for that, you will need to insert a change filament script in your slicer (or time it right with your firmware).

Bottom layers set to 2 and the top at 2-3 (3 is best).
Do not go below 25% infill, otherwise the top surface could get uneven if your bridging isn't on point.
2 walls will be fine.
Mind the speed.

I recommend using a brim for better adhesion, especially on the battery outline, indicator and lightning part.

Approximate print time (with listed settings): 2-2½ hours
Main dimensions are 150x100 mm

Glue the parts on the base, in whatever horizontal direction you prefer

Mount it with double sided tape, or hot-glue to a small rope, yarn or whatever you fancy. Heck, glue it to a stick and plant it outside your door if you wanna go beyond the household.

You need a custom sign made?
Drop me a comment or send an email to [email protected]