Shower Hose To Garden Spigot Adapter 3D Printer Model
The file 'Shower Hose To Garden Spigot Adapter 3D Printer Model' is (stl) file type, size is 5.4MB.
The file 'Shower Hose To Garden Spigot Adapter 3D Printer Model' is (stl) file type, size is 5.4MB.
This thing is an adapter that connects a standard shower massage wand to a standard garden hose spigot. I use it bathe my dogs and to rinse off after the pool. It looks a lot nicer than the kludge I used to use.
I printed it in ABS at 100% infill for strength. When I tested it under pressure, a couple of pinhole leaks appeared, so I did a two hour acetone polish to make it water tight.
I also did a quick hose washer that I printed in SemiFlex, but it was a little too stiff to seal properly so I ended up using a store bought washer. When I get some Ninjaflex, which is softer, I'll try the washer again.
| garden_hose_gasket.stl | 468.6KB | |
| hose_bib_to_shower_hose_adapter_v6.stl | 9.1MB |
