Shower Head Holder Extension 3D Printer Model
The file 'Shower Head Holder Extension 3D Printer Model' is (stl) file type, size is 271.1KB.
The file 'Shower Head Holder Extension 3D Printer Model' is (stl) file type, size is 271.1KB.
The holder for my shower head is mounted too low for me (or i'm just too tall) so his is just a basic extension to increase the height so i don't have to duck to shower - measurements are fine for my setup, no clue if there is a standard for those things.
printed in ABS with supports, no raft, 20% infill, 0.3mm layers
edit (6/6/16): could use a little more reinforcement at the top... added a model with 3mm thicker outer walls.
marking this as work in progress until i found a good way to reinforce this, funny enough, the bottom part is pretty stable but the top holder is probably going to rip the layers apart. thinking about adding a screw on ring on top to reinforce it.
PLEASE be careful, depending on how you print this (or what shower you use it with - it might not be strong enough. i've only used it for 2 days so far and i'm still alive :)
| showerHeightExtender.stl | 489.4KB | |
| showerHeightExtender_thickerOuterWall.stl | 477.9KB |
