Created a shower basket to hang over a simple glass shower wall.
You need support when printing the basket. I adde manual support so it would be simpler to remove it it did not fill up the entire empty space. Se attached image that show this.
I also made a utility hook for a razor and a simple hook but this is optional to print. If you want to custom make your own utility to hang, I added the top part of the hook as an Fusion 360 file.
I designed extra hooks to mount if you want an extra basket. I did not try this myself, but I think this might work... Feel free to try this, or comment it you see somehow this will not work.
Added two extra hook types. One with a double hook so you can have basket on both sides, and one with a simple hook on the back. Also added a basket that is closed in the bottom if you want a closed basket on the opposite side of the shower.
EDIT 17.12.2018: Added a Squeegee hanger
EDIT 17.12.2018: Added a basket hook that will fit over glass block showerwalls.
| Basket.stl | 501.6KB | |
| Basket_hook.stl | 437.5KB | |
| Basket_hook_with_extra_hook_in_the_back.stl | 533.1KB | |
| Closed_basket.stl | 607.2KB | |
| Double_basket_hook.stl | 688.9KB | |
| Glassblock_basket_hook.stl | 463.9KB | |
| Grating.stl | 88.2KB | |
| Hook_for_extra_basket.stl | 397.8KB | |
| Razor_utility_hook.stl | 826.8KB | |
| Shorter_basket_hook_that_will_fit_a_150mm_buildplate.stl | 442.3KB | |
| Simple_utility_hook.stl | 487.0KB | |
| Squeegee_hanger.stl | 911.4KB | |
| Utility_hook_-_BLANK.f3d | 53.2KB |
