Short Circuit Johnny 5 Alexa Holder 3/4 Scale 3D Printer Model
The file 'Short Circuit Johnny 5 Alexa Holder 3/4 Scale 3D Printer Model' is (stl,3mf) file type, size is 21.6MB.
The file 'Short Circuit Johnny 5 Alexa Holder 3/4 Scale 3D Printer Model' is (stl,3mf) file type, size is 21.6MB.
This is a reworked version of this great model https://www.thingiverse.com/thing:5541988 if you make this please go heart his model too.
Johnny stands about 40 inches tall and has a Amazon alexa echo in his chest with a led sound module feeding leds in his mouth whenever its playing sounds. https://www.amazon.com/gp/product/B09FJL2VL2/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&psc=1
I used an old usb cable for the smaller hydraulic lines. I printed mine in Sunlu silk pla+ all outer walls at 40/mms. I attached all parts with ca glue and activator and for the sholder and elbow pegs I use tape to make the joint tight so it can still move but lock in place.
Due to file size I uploaded as draft quality, i printed all mine at .2 layer height with 15% infill and 3-4 walls
Also more than one part can fit pe plate it was having issues uploading full plates.
Supports are a per plate situation and all are not the same, you will need to pick the best option for each print, I already have the parts in the best orientation to print. The 4th slot is swapped out for the red toolbox
| actuator.stl | 98.5KB | |
| antenna.stl.stl | 233.5KB | |
| arm_1.stl | 568.1KB | |
| arm_2.stl | 568.1KB | |
| arm_a.stl | 153.8KB | |
| arm_b.stl | 153.8KB | |
| arm_peg.stl.stl | 12.4KB | |
| arm_peg.stl1.stl | 12.4KB | |
| arm_peg.stl2.stl | 12.4KB | |
| arm_peg.stl3.stl | 12.4KB | |
| crazy_tool_thing.stl | 5.3MB | |
| eblow_pin.stl | 152.0KB | |
| echo_chest.stl | 762.3KB | |
| elbow_pin_2.stl | 152.0KB | |
| eye1.stl | 117.1KB | |
| eye2.stl | 117.1KB | |
| eyebrow.stl | 72.2KB | |
| eyebrow2.stl | 78.4KB | |
| head.stl | 1.1MB | |
| hips.stl | 1.9MB | |
| iris.stl | 47.0KB | |
| iris2.stl | 47.0KB | |
| Johnny+5+Alexa+bot.3mf | 9.2MB | |
| lower_base.stl | 327.2KB | |
| mid_base.stl | 105.1KB | |
| mid_mount.stl | 1.4MB | |
| mouth.stl.stl | 71.7KB | |
| mouth_led.stl.stl | 199.6KB | |
| neck.stl | 963.7KB | |
| neck2.stl | 300.8KB | |
| neck_tube_a.stl | 119.9KB | |
| neck_tube_b.stl | 119.9KB | |
| neck_tube_c.stl | 105.5KB | |
| neck_tube_d.stl | 100.4KB | |
| plates.stl.stl | 9.7KB | |
| rear_section_no_shock.stl.stl | 368.1KB | |
| rear_shock_black.stl | 872.5KB | |
| rear_tire.stl.stl | 551.6KB | |
| sholder.stl.stl | 419.9KB | |
| sholder_a.stl | 163.1KB | |
| sholder_b.stl | 163.1KB | |
| side_panel_1.stl | 400.3KB | |
| side_panel_2.stl | 397.0KB | |
| square_peg.stl | 2.6KB | |
| square_peg2.stl | 2.6KB | |
| support_rod1.stl | 5.9KB | |
| support_rod2.stl | 5.9KB | |
| tool_box.stl | 222.8KB | |
| tool_box_arm.stl | 43.6KB | |
| tool_box_handle.stl | 163.4KB | |
| track_a.stl | 1.6MB | |
| track_b.stl | 1.6MB | |
| track_base_b.stl | 258.4KB | |
| track_base_c.stl | 486.0KB | |
| track_base_d.stl | 486.0KB | |
| track_base_front.stl | 492.4KB | |
| track_c.stl | 1.7MB | |
| track_d.stl | 1.7MB | |
| track_thing.stl | 181.0KB | |
| track_thing2.stl | 181.0KB | |
| track__base_a.stl | 258.4KB | |
| upper_base.stl | 753.0KB |
