Shore Trooper Helmet V2 (Sean Fields) Split To Fit 200×200 Build Plate 3D Printer Model
The file 'Shore Trooper Helmet V2 (Sean Fields) Split To Fit 200×200 Build Plate 3D Printer Model' is (stl,txt) file type, size is 63.1MB.
The file 'Shore Trooper Helmet V2 (Sean Fields) Split To Fit 200×200 Build Plate 3D Printer Model' is (stl,txt) file type, size is 63.1MB.
This is the V2 version of SeanKFields Shore Trooper helmet. All credit for this model goes to him I merely chopped the files to fit my bed. The original files (including the armour) can be downloaded directly from http://shoretrooper.co.uk I only had to chop 6 files in the end.
I have left the original sized pieces intact and added A and B options which are the bits I needed to split. The face will fit on the bed but I found it easier printing these split up and then gluing back together. I did put a registration tab on the rear rim but after printing a few of my chopped bits it wasn't necessary so left the rest.
Update 28/3/19:
Started printing another for a AT ACT driver helmet and wanted to print the front cap in one piece so combined it. It saves some gluing, filling and sanding. 0608_-_combined_cap_front.stl
Update: Added a Kyber trooper to the collection. Fan fiction so took some guesses with the colours: Montanas black - mermaid, white, black; Montanas gold - Red orange
If you want to see more of the build process:
https://imgur.com/gallery/Ea5jt
https://imgur.com/gallery/uP80a
| 00_-_Full_Construct.stl | 47.4MB | |
| 01a_-_Blast_Shield_Revised.stl | 2.1MB | |
| 01b_-_Blast_Shield_Revised.stl | 2.1MB | |
| 01_-_Blast_Shield.stl | 3.5MB | |
| 01_-_Blast_Shield_Revised.stl | 4.1MB | |
| 02a_-_Dome_Centre.stl | 6.6MB | |
| 02b_-_Dome_Centre.stl | 6.1MB | |
| 02_-_Dome_Center.stl | 12.4MB | |
| 03a_-_Dome_Right.stl | 3.6MB | |
| 03b_-_Dome_Right.stl | 2.8MB | |
| 03_-_Dome_Right.stl | 6.3MB | |
| 04a_-_Dome_Left.stl | 3.7MB | |
| 04b_-_Dome_Left.stl | 2.8MB | |
| 04_-_Dome_Left.stl | 6.4MB | |
| 05_-_Shield_Mount.stl | 3.2MB | |
| 0608_-_combined_cap_front.stl | 794.1KB | |
| 06_-_Right_Cap_Front.stl | 417.4KB | |
| 07_-_Right_Cap_Back.stl | 2.3MB | |
| 08_-_Left_Cap_Front.stl | 355.9KB | |
| 09_-_Left_Cap_Back.stl | 2.4MB | |
| 10a_-_Facesplit.stl | 2.4MB | |
| 10b_-_Facesplit.stl | 2.4MB | |
| 10_-_Face.stl | 819.5KB | |
| 10_-_Face_w___Supports.stl | 5.1MB | |
| 11a_-_Back.stl | 441.7KB | |
| 11b_-_Back.stl | 371.0KB | |
| 11_-_Back.stl | 809.9KB | |
| 12a2_-_Rim_Back.stl | 420.9KB | |
| 12a_-_Rim_Back.stl | 415.0KB | |
| 12b_-_Rim_Back.stl | 390.1KB | |
| 12_-_Rim_Back.stl | 803.8KB | |
| 13_-_Insignia_Stencil.stl | 980.4KB | |
| 14_-_Side_Right.stl | 508.7KB | |
| 15_-_Side_Left.stl | 508.2KB | |
| 16_-_Cheek_Right.stl | 602.4KB | |
| 17_-_Cheek_Left.stl | 557.1KB | |
| 18_-_Cheek_Greeblie_Right.stl | 13.6KB | |
| 19_-_Cheek_Greeblie_Left.stl | 13.6KB | |
| 20_-_Snout_Back.stl | 834.0KB | |
| 21_-_Snout_Front.stl | 520.4KB | |
| 21_-_Snout_Mesh.stl | 422.3KB | |
| 22_-_Eye_Bags.stl | 729.8KB | |
| 23_-_Goggle_Top.stl | 218.2KB | |
| PLEASE_READ_-_USAGE_RIGHTS.txt | 1.6KB |
