These are parts to convert my 16 gal 1980's era Craftsman Shop Vac to use a Ridgid HEPA filter bag. Dust stays in the bag and virtually none escapes out the vacuum exhaust now.
I used some Teflon tape, then slid on the parts and pinned them in place with small sheet metal screws. They could be glued if you prefer.
I needed to use large needle nose pliers (see in photo) to get the bag over the bump ring on the adaptor. But it would not stay on when I tried a smaller bump.
Shop_Vac_Dust_Bag_Adaptor.scad | 640.0B | |
Shop_Vac_Dust_Bag_Adaptor.stl | 140.7KB | |
Shop_Vac_Dust_Bag_End_Cap.scad | 359.0B | |
Shop_Vac_Dust_Bag_End_Cap.stl | 81.9KB |