Shoe Rack V2 (3x Beams) 3D Printer Model
The file 'Shoe Rack V2 (3x Beams) 3D Printer Model' is (STL) file type, size is 64.6KB.
The file 'Shoe Rack V2 (3x Beams) 3D Printer Model' is (STL) file type, size is 64.6KB.
This is a simple and small shoe rack (NOT stackable, as I felt it would be too rickety and was unnecessary for me since I own like 3 pairs of shoes).
I designed this shoe rack from scratch, referencing the existing design from 3DDIY (Stackable Shoe Rack) (theirs is stackable).
This design has ACTUAL hexagon cutouts in the STL part - therefore it does not require you to do any funky infill or print settings. It's a normal part that you should be able to print like normal.
In the pictures, I used .28mm layer height.
<<>>
Fits about 2-3 pairs per level, for a total of 4-6 pairs.
7.26in (tall) x .5in (thick) x 7.5 (wide)
<<>>
PICTURED: (x3) Home depot - WALNUT wood - .75in height, 2in wide, 2 ft long
<<>>
PRINT WITH A BRIM!!! My first time printing had adhesion problems on both foot corners. With a brim or rift, it should print nicely.
Can fit (with a brim) on an ender 3 pro printbed (you may need to adjust the amount of brim lines.
If you have any recommendations let me know, I am open to modifying the Solidworks part :)
| SHOE_RACK_v2.STL | 303.2KB |
