Ship Details – Admiralty Stock Anchor (3t, Scale 1-1) 3D Printer Model
The file 'Ship Details – Admiralty Stock Anchor (3t, Scale 1-1) 3D Printer Model' is (stl,stp) file type, size is 5.6MB.
The file 'Ship Details – Admiralty Stock Anchor (3t, Scale 1-1) 3D Printer Model' is (stl,stp) file type, size is 5.6MB.
For a running project I needed an admiralty anchor and was surprised that there aren’t much correctly modelled anchors available for download, including a correct Admiralty anchor or stock anchor.
Fortunately, I found makers drawings, so I modelled one myself. Model size is in this case 1:1 for an anchor of 3000kg, what is the maximum size of this anchor, at least as per maker’s drawing. Smaller vessels would have smaller anchors of course… table below may be useful to define the size in full scale. Further the anchor must be downscaled to model size of course.
STEP-file is included in case you wish to add more details.
Hope it will be useful to create others/more nice ship models.
Anchor size table (weight, kg -> Size L as per drawing, mm):
10 kg -> 445 mm
15 kg -> 490 mm
20 kg -> 520 mm
30 kg -> 565 mm
50 kg -> 635 mm
75 kg -> 710 mm
100 kg -> 780 mm
125 kg -> 840 mm
150 kg -> 900 mm
200 kg -> 990 mm
250 kg -> 1065 mm
300 kg -> 1105 mm
400 kg -> 1240 mm
500 kg -> 1335 mm
600 kg -> 1440 mm
700 kg -> 1500 mm
800 kg -> 1570 mm
1000 kg -> 1680 mm
1250 kg -> 1810 mm
1500 kg -> 1955 mm
2000 kg -> 2140 mm
3000 kg -> 2415 mm
| Admirality_anchor.stl | 6.1MB | |
| Admirality_anchor.stp | 480.6KB | |
| Admirality_anchor_stowed.stl | 6.1MB |
