Shims For 2 Digit Counter 3D Printer Model
The file 'Shims For 2 Digit Counter 3D Printer Model' is (stl) file type, size is 65.5KB.
The file 'Shims For 2 Digit Counter 3D Printer Model' is (stl) file type, size is 65.5KB.
I found the original design for this almost worked, but the tolerances didn't work with my printer. Not wanting to waste the print I made these shims in various sizes, I only used a few of them but it tightened up the mechanism enough to the point that it works reliably now. Thanks to the original creator for making the counter!
| Screw10_0.6mm_Shim.stl | 67.7KB | |
| Screw10_0.8mm_Shim.stl | 67.7KB | |
| Screw10_1.0mm_Shim.stl | 67.7KB | |
| Screw8_0.6mm_Shim.stl | 66.7KB | |
| Screw8_0.8mm_Shim.stl | 66.7KB | |
| Screw8_1.0mm_Shim.stl | 66.7KB |
