Shifter Knob For Th8s 3D Printer Model
The file 'Shifter Knob For Th8s 3D Printer Model' is (stl) file type, size is 871.4KB.
The file 'Shifter Knob For Th8s 3D Printer Model' is (stl) file type, size is 871.4KB.
i noticed that there was none of these on the internet, i only found adapters and almost none shifters that fit on the adapters, so i decited to make my own
it just slots into the shifter slot and uses the original shifter knob screw, so there is no adapter needed
there are 3 files, 12mm one is the one with a big hole on the top for bigger screwdrivers and the 8mm for smaller ones, the screw just fits in so make sure the printer is calibrated, there is also one with no hole because it goes in very tightly on its own too good for people who dont have long torx screwdrivers
i made mine out of pla, petg would be stronger
15% infill
0.20mm quality
no supports
and a brim
everything is made on a ender 3, so you dont need no fancy printer for this
link to download page:https://www.printables.com/model/698062-shift-knob-for-th8sno-adapter-needed
| no_adapter_shift_knob_12mm_hole.stl | 723.5KB | |
| no_adapter_shift_knob_8mm.stl | 655.3KB | |
| no_adapter_shift_knob_no_hole_4.stl | 652.6KB |
