IG @luft.media.designs
GPS mount with slots for SMA plugs. There's two versions.
regular SMA and Waterproof SMA (bigger). (I used 200mm extensions for the build)
Both are made for Foxeer M10Q 250 (25x25mm with the plug in the center)
https://www.foxeer.com/foxeer-m10q-250-gps-5883-compass-g-508
CRSF diversity mount for mounting in the front, over the Air unit.
should fit the frame as it comes from factory, but I personally swapped the standoffs for 30mm.
20mm longer legs for 8inch builds with taller motors. remember to mirror 2 when printing.
mount for xt90e-m plug. (made to be used with m3 hot melt inserts (4x5mm)
I printed everything in 95a TPU with 90% infill. Use support for overhangs.
| thicc_diversity.stl | 92.5KB | |
| thicc_diversity_strap.stl | 23.3KB | |
| thicc_gps_mount.stl | 79.8KB | |
| thicc_gps_mount_v2_rspro.stl | 196.0KB | |
| thicc_leg_+20_mirror_2.STL | 538.3KB | |
| thicc_xt90e-m_rear_mount.stl | 244.5KB |
