Shelly Pro 1, 2 Series Enclosure 3D Printer Model Free Download

Description Files (2)

Summary

Enclosure for the Shelly Pro 1, 2 Series Products with the same dimensions. A cable for power supply and 2 cable outputs for the devices which are to be switched and the power is to be monitored.

I used standard extension cables, cut off and led it into the housing. Then I used 1x 3 WAGO and 2x 5 WAGO terminals, cable binders and core sleeves for the phases. The holes for the cables have a diameter of 7mm. Also I use a short and flat Ethernet Patch Cable and a Delock Modul D-Typ RJ45 Cat.6, This Module you will find sure with a different brand name.

Following links to the products, use Google, you will find them elsewhere.

Shelly Pro 4PM LAN und WiFi-DIN-Rail Switch
https://www.shelly.com/de-ch/products/product-overview/shelly-pro-4pm-1

Delock Modul D-Typ RJ45 Cat.6 Buchse zu Buchse
https://www.delock.de/produkt/86782/merkmale.html

Very important:

Use a suitable filament for an electric housing. I use ABS or ASA for my housing.

And be very careful during the montage. Be careful not to harm cables, use cable tie and compare the cable route with the example photo.

This Housing is not certified or officially tested.

The assembly should be carried out by an electrician. I expressly reject any responsibility!

If you would like to use or reproduce this electric housing commercially, please contact me to conclude a license agreement.

This can be used free of charge for private use. But I'm very looking forward to your donation: http://Ko-fi.com/beathoch

or: https://www.paypal.com/donate/?business=ABYSDSCV8PD4W&no_recurring=0¤cy_code=CHF

Only thanks to your donation can other interesting things arise.
Thank you very much!

Shelly_Pro_2PM_Case.stl	315.1KB
Shelly_Pro_2PM_Top.stl	154.2KB

Shelly Pro 1, 2 Series Enclosure 3D Printer Model

Summary

Tags

You might also like