Shelly Dock / Jig For Mini, Plus And Wave 3D Printer Model
The file 'Shelly Dock / Jig For Mini, Plus And Wave 3D Printer Model' is (stl) file type, size is 347.1KB.
The file 'Shelly Dock / Jig For Mini, Plus And Wave 3D Printer Model' is (stl) file type, size is 347.1KB.
The Shelly Mini dock that is utilised for testing Shelly Mini devices, as demonstrated in the video linked here: https://www.youtube.com/watch?v=SRrmR5CEWoM&t=2096s
PETG filament is recommended due to its enhanced flexibility and better fire resistance compared to PLA or ABS.
While both parts of the dock are designed to be printed without supports, it is advisable to use rafts for printing the front part to have better adhesion.
Additional printing settings may vary depending on the filament and the printer itself. I personally printed it using a Creality Ender 3 within a custom-built enclosure.
If you're loving the dock, I would be thrilled if you could share your appreciation by a small donation on https://Paypal.me/IgorMx
| Shelly_Mini_Dock_back.stl | 128.3KB | |
| Shelly_Mini_Dock_front.stl | 269.8KB | |
| Shelly_Plus_Wave_Dock_back.stl | 140.0KB | |
| Shelly_Plus_Wave_Dock_front.stl | 426.3KB |
