Shelf Lip To Keep Things From Falling Off 3D Printer Model
The file 'Shelf Lip To Keep Things From Falling Off 3D Printer Model' is (gcode,amf,f3d,stl) file type, size is 74.1KB.
The file 'Shelf Lip To Keep Things From Falling Off 3D Printer Model' is (gcode,amf,f3d,stl) file type, size is 74.1KB.
This is a thin lip to go on the edge of a shelf to keep small items from falling off.
It has a 1 or 2 layer 20mm wide flat part that I affix to the shelf with double sided tape. The lip is 5 or so mm tall. The lip is 5 mm on the inside, but has a fillet on the visible side so that if you are looking at the shelf from a lower angle it is almost invisible.
Small enough to not be noticeable on a shelf the same color, large enough to prevent a bump on the shelf to have things come crashing down.
Saves me a lot of anxiety.
The shelf lip is 200mm wide. I have included the fusion files so that you can customize to your needs. I just printed them and snipped the last to fit the shelf, but if you want just extrude or push/pull the edge to the dimensions you want for a perfectly flush install.
| Shelf_Lip.gcode | 88.7KB | |
| Shelf_lip.zip.amf | 5.0KB | |
| shelf_lip_v1.f3d | 51.9KB | |
| shelf_lip_v1_stl_is_as_dumb_format_use_3mf_or_Amf_instead_but_here_you_are.stl | 6.1KB |
