Shelf-Hook Typ5 For 19mm Boards (P-SLOT System) 3D Printer Model
The file 'Shelf-Hook Typ5 For 19mm Boards (P-SLOT System) 3D Printer Model' is (gcode,stl) file type, size is 757.3KB.
The file 'Shelf-Hook Typ5 For 19mm Boards (P-SLOT System) 3D Printer Model' is (gcode,stl) file type, size is 757.3KB.
After installing our new shelf system my wife asked me, to design some additionally hooks. She requested different types to hang up bags and different kitchen equipment at various places. Due to the different requirements such as load, flexibility or hook dimensions there not a one fit’s all model.
Type 5 was designed to hold some big bags (e.g. isolated bags for frozen food near the freezer). For this reason the hook is wider to collect some of the handles. Because of the light weight of empty bags the load is only calculated with 20N and tested with approx. 2,5kg.
The hooks are suitable for 19mm width boards, for example the P-SLOT system of regalraum.com.
Please feel free to remix the thing fitting on your board width!
If this shelf-extension is interesting you might check my other hook types here:
Typ 3 - https://www.thingiverse.com/thing:4252685
Typ 4 - https://www.thingiverse.com/thing:4252700
Typ 6 - https://www.thingiverse.com/thing:4252715
or the Board-Fix design to lock a non screwed board on the supports:
https://www.thingiverse.com/thing:4237738
To secure the boards against tilting my board-stopper might be helpful:
https://www.thingiverse.com/thing:4561974
| 2x-Regalhaken-Typ5-V1_PETG_h0.2-s3-i30-n240-b90_MK3S.gcode | 3.3MB | |
| Typ5.stl | 123.8KB |
