Sheet Wood Joiner adapted for the screws and nuts easily available on my location. (Santiago, Chile)
For 15mm sheet wood. Screw & nut its 1/4" (6mm) x 7/8" (23mm)
For strength i used the following configuration:
Layer Height: 0.15
Wall Line Count: 4
Infill Density: 30%
Infill Pattern: Triangles
Infill Line Multiplier: 2
Support: Brim
Hope it works well. Tell me if you use another one.
| PlyWood_Inner_PernoUnCuarto.3dm | 3.0MB | |
| PlyWood_Inner_PernoUnCuarto.stl | 136.9KB | |
| PlyWood_Outer_TuercaUnCuarto.3dm | 3.0MB | |
| PlyWood_Outer_TuercaUnCuarto.stl | 83.7KB |
