Shanghai Oriental Pearl Building 3D Printer Model
The file 'Shanghai Oriental Pearl Building 3D Printer Model' is (STL) file type, size is 63.9MB.
The file 'Shanghai Oriental Pearl Building 3D Printer Model' is (STL) file type, size is 63.9MB.
Shanghai Oriental Pearl Building
80 CM height.
Design to be printed without support at all.
there is a complete version (All.stl) and there is split version.
Once all parts are printed, just use a little glue to put them all together.
Enjoy,
| All.STL | 82.2MB | |
| Antena1-x1.STL | 37.1MB | |
| Antena2-x1.STL | 652.9KB | |
| Ball1-1-x1.STL | 46.1MB | |
| Ball1-2-x1.STL | 45.8MB | |
| Ball2-1-x1.STL | 18.9MB | |
| Ball2-2-x1.STL | 15.5MB | |
| Ball3-1-x1.STL | 1.9MB | |
| Ball3-2-x1.STL | 1.9MB | |
| Base-x1.STL | 6.3MB | |
| Center_Ball1-x2.STL | 182.9KB | |
| Floor-A-x1.STL | 3.7MB | |
| Floor-B-1-x5.STL | 249.3KB | |
| Floor-B-2-x5.STL | 932.0KB | |
| Floor-x1.STL | 261.2KB | |
| High_Pole-1-x3.STL | 9.1MB | |
| High_Pole-2-x3.STL | 9.2MB | |
| Leg-1-x3.STL | 2.5MB | |
| Leg-2-x3.STL | 2.5MB | |
| Low_Pole-1-x3.STL | 7.0MB | |
| Low_Pole-2-x3.STL | 7.0MB |
