SGI Octane XIO Blank 3D Printer Model
The file 'SGI Octane XIO Blank 3D Printer Model' is (scad,stl) file type, size is 205.3KB.
The file 'SGI Octane XIO Blank 3D Printer Model' is (scad,stl) file type, size is 205.3KB.
Blank panel for SGI XIO boards as found in Octane workstations.
It's probably a good idea to print the panel (and baffle if putting two blanks side-by-side) out of PETG to avoid the potential for a warm system making things droopy, but the fronts are probably fine in standard PLA.
The front is designed to be held in place by two M3 screws in the wider spaced pair of holes, an original steel front can be fixed to the lower holes with #6 self-tapping screws, but there's not much support, so go easy.
| sgi_xio_blank_assembly.scad | 552.0B | |
| sgi_xio_blank_baffle.scad | 1.7KB | |
| sgi_xio_blank_baffle.stl | 144.2KB | |
| sgi_xio_blank_common.scad | 1.4KB | |
| sgi_xio_blank_cover.scad | 2.5KB | |
| sgi_xio_blank_cover.stl | 197.3KB | |
| sgi_xio_blank_front.scad | 729.0B | |
| sgi_xio_blank_front.stl | 144.4KB | |
| sgi_xio_blank_tray.scad | 3.1KB | |
| sgi_xio_blank_tray.stl | 452.2KB |
