Sewer Drain Hose Clamp 3D Printer Model
The file 'Sewer Drain Hose Clamp 3D Printer Model' is (stl) file type, size is 5.6MB.
The file 'Sewer Drain Hose Clamp 3D Printer Model' is (stl) file type, size is 5.6MB.
Suitable for connecting PVC or silicone hoses to the sewer.
The clamps are connected to each other using 10 mm or longer screws and M3 nuts (DIN965, DIN394). It is recommended to put something between the clamp and the drain around the hole for additional sealing (e.g. double-sided tape on the photo).
In horizontal position (photo), water may flow into the hose from the drain if there is no check valve, the hose has holes or there is no air lock in the hose.
| sewer_1.stl | 18.1MB | |
| sewer_2.stl | 14.5MB | |
| socket.stl | 25.5MB |
