Settlers Of Catan Magnetic Hex Shell 3D Printer Model Free Download

3D Printer Models

Settlers Of Catan Magnetic Hex Shell 3D Printer Model

Author: @Stetofire

License: CC BY

File formats: stl

Download type: zip

Size:2.7KB

The file 'Settlers Of Catan Magnetic Hex Shell 3D Printer Model' is (stl) file type, size is 2.7KB.

Description Files (1)

Summary

These shells hold the original tiles together with magnets.
Each shell requires twelve 3mm cubic magnets, for a total of 228 (19 hexes * 12 magnets) to complete the original game set.

If you also want to print the port shells, note that an extra 18 magnets will be needed (9 ports * 2).

I can't seem to find 3mm Cubic Magnets on Amazon anymore, so here are some possible other places to look. I'm not endorsing any of these, so make sure to research them:
Lightinthebox
eBay
NewEgg Search
NewEgg
NewEgg

!! IMPORTANT !!

Magnets must be glued following a specific pattern!
There are two magnets per side so every tile will connect to every other tile without repulsion.
The very first magnet can be glued in any orientation, but its partner must be glued in opposing polarity; such that a side will attach when the shell is rotated.
Subsequent gluings can be accomplished by placing loose magnets on a side of a completed shell, placing glue in the magnet holes, and pressing the shells together.

Buy me a drink at https://ko-fi.com/stetofire
or donate directly

Hex_Shell_Cube_Magnets.stl

13.0KB