Settlers Of Catan Interlocking Pieces 3D Printer Model
The file 'Settlers Of Catan Interlocking Pieces 3D Printer Model' is (stl) file type, size is 18.5MB.
The file 'Settlers Of Catan Interlocking Pieces 3D Printer Model' is (stl) file type, size is 18.5MB.
Decided to remix the JAWong pieces to interlock with each other, just needed to trim the first 'thicker' layer off from the pieces and seems to fit quite nicely together.
I used rbuckbailey's Player Pieces (http://www.thingiverse.com/thing:46065) which clip into place securely.
July '15 - Added water pieces to go with the tiles. They just fit onto 200x200mm print bed at 45° with a couple of mm to spare.
| Border_1_2.stl | 350.6KB | |
| Border_2_3.stl | 560.9KB | |
| Border_3_4.stl | 360.0KB | |
| Border_4_5.stl | 547.3KB | |
| Border_5_6.stl | 358.1KB | |
| Border_6_1.stl | 546.8KB | |
| Brick.stl | 997.2KB | |
| Desert.stl | 12.3MB | |
| Ore.stl | 274.6KB | |
| Sheep.stl | 4.6MB | |
| Sheep_repaired.stl | 4.6MB | |
| Wheat.stl | 171.0KB | |
| Wood.stl | 17.2MB |
