Set Of Molds For Making Small Furniture From Cement Or Plaster 3D Printer Model
The file 'Set Of Molds For Making Small Furniture From Cement Or Plaster 3D Printer Model' is (stl) file type, size is 460.6KB.
The file 'Set Of Molds For Making Small Furniture From Cement Or Plaster 3D Printer Model' is (stl) file type, size is 460.6KB.
File for casting a silicone mold from which you can make cement or gypsum bricks
A set of molds for making small chairs, poufs, tables, sofas.
Approximate height of the models is 40 mm.
Table width 70 mm
Sofa width 120 mm
Chair width 40 mm
The file contains both the mold itself and removable side parts.
All you need to do is attach the sides with paper clips.
Suitable for both SLA and FDM printing.
Recommended printing parameters:
FDM (filament):
Layer thickness: 0.1 - 0.2 mm.
Printing speed: depends on your printer.
I printed on the Creality K1 with Hyper PLA filament at 300mm/sec.
Print Material: PLA
SLA (Epoxy):
Layer thickness: 0.05mm
Z axis lift speed: 2 mm/sec.
Eboxy resin: Creality UV curable Resin.
| cementMoldBarV17.1.stl | 684.0B | |
| cementMoldBarV17.2.stl | 684.0B | |
| cementMoldBarV17.3.stl | 684.0B | |
| cementMoldV17.1.stl | 362.0KB | |
| cementMoldV17.2.stl | 232.3KB | |
| cementMoldV17.3.stl | 638.3KB |
![Beer Yeast Separation Funnel Using Erlenmeyer [Customizable] 3D Printer Model](https://cdn.3axis.co/assets/26/28/ba/bf/2628babf-5264-48d4-a6a6-bf2f7a68f55c/images/534046e7-64a7-4d78-bc31-d2a1fd092da0_thumb.jpg)
