Servo Valve 3D Printer Model
The file 'Servo Valve 3D Printer Model' is (STL) file type, size is 2.4MB.
The file 'Servo Valve 3D Printer Model' is (STL) file type, size is 2.4MB.
The servo valve allows to control pneumatic devices using standard or micro RC servos, making it a very cost-effective solution for controlling pneumatic projects.
The valve body is the same as in the manual valve, so the connections are compatible with the manifold base, connectors/valves and logic gates.
After assembling the servo valve(s) these can be controlled using suitable servo controller hardware and software. There is one important pecularity in controlling this type of servo valve: the setpoint is often not reached due to friction between the valve and switch (undershoot). If not accounted for, this would keep the motor powered and cause high current consumption, a buzzing noise and stress on the servo teeth. A good solution is to initially add 2° to the setpoint and revert to the original setpoint after 350 ms.
Download the Arduino library for effectively controlling motors and other devices using these valves.
Video: https://youtu.be/523QuGY_VwU
| ServoBracketBottom_Micro.STL | 109.5KB | |
| ServoBracketBottom_Standard.STL | 115.5KB | |
| ServoBracketTop_Micro.STL | 111.2KB | |
| ServoBracketTop_Standard.STL | 115.5KB | |
| ServoConnector.STL | 167.5KB | |
| ServoMountSpacer_Micro.STL | 13.6KB | |
| ServoMountSpacer_Standard.STL | 29.2KB | |
| ServoSwitch.STL | 61.9KB | |
| ValveBody_4mm.STL | 2.3MB | |
| ValveBody_M5.STL | 2.9MB |
