Unlike the original, this requires only 8 bearings 627z or 608 (like spinner), making it more economical but preserving the resistance of the wheels.
In addition, I created a support for the raspberry pi 3 and another to hold an Lm2596 module to reduce the voltage of a 4S battery that had fallen into disuse.
The base.stl or Main, is based on the design of diass07.
https://www.thingiverse.com/thing:1736808/#comment-1202412
I did not edit the ServoGear, Left_skirt, right_skirt and track_175mm files, but I upload the original lynlim design for ease of the user who wants to download the project.
Whatever you want, but this design has
| Back_Left2.stl | 545.8KB | |
| Back_Right2.stl | 545.8KB | |
| base.stl | 247.6KB | |
| front.stl | 487.3KB | |
| Left_skirt.stl | 177.0KB | |
| RaspBerryMount.stl | 63.2KB | |
| RaspBerry_Support.stl | 23.0KB | |
| RaspBerry_Support_2.stl | 105.3KB | |
| right_skirt.stl | 187.2KB | |
| ServoGear.stl | 102.7KB | |
| suspension_damper_Pin1.stl | 131.3KB | |
| suspension_damper_Pin2.stl | 688.0KB | |
| TapaRueda.stl | 22.0KB | |
| trackwheelBack.stl | 591.8KB | |
| trackwheelTop.stl | 601.3KB | |
| Trackwheelunder.stl | 573.2KB | |
| track_175mm.stl | 299.9KB |
