This print is designed to have the head be about 7cm across. But can be printed in both larger and smaller sizes. the smaller you print it the stiffer the doll will be, the larger the more loose the joints will fit.

Depending on assembly, the doll can be made to be very loose and more of a ragdoll or more of a posable figurine once assembled.

Needed for assembly:

• Glue (preferably some kind of super glue)
• About 100mm of 1.75mm PLA filament to use as rivets.
• Something to heat up PLA, lighter or soldering iron works fine.
• Sandpaper

This print is in 36 parts to ensure that it can be printed on pretty much any type and/or size of printer.
The two .stl files you see here are mostly for reference but Posable_Hollowed_Reference_Layout.stl can also be used to print out all parts at once if your print bed is large enough - you will have to print a 2nd copy of the head as it needs to be printed twice to give you both parts needed - .

With download you'll get three Blender files, PosableHollowed_ColorCoded_LRUB.blend and PosableHollowed_ColorCoded_Position.blend are to help with assembly and PosableHollowed_Parts.blend is for those interested in modding or just curious how it's built.

This design was a pet project of mine, mostly to learn about printing joints but also something I used to brainstorm poses for my creative work.