GENERAL INFO
I have never understood the popularity of selfiesticks - i find them quite useless. However, i get one for me, and decided to actualy improve it, and create a folded tripod.
tripod holds your phone in place, eg. during long exposition photos, making films, dispaying something on screen etc. foots have 2 opional positions:
flat allows to stand on desk or floor
sharp allows to stick it into ground for more stabilty
my selfiestick allows also to mount camera instead of a phone. But I don't recoment using big, heavy and expensive SLRs anyways
instead of selfiestick you can use a normal stick and make eg. flag stand
ASSEMBLING
you will need :
selfie stick with fi 18 handle (at least 10cm long)
3x tripod foot
3x tripod leg
3x tripod joint
tripod top ring
tripod bottom ring
13x M3x12 - M3x18 screws (I used M3x16)
13x M3 nut
some washers
PRINTIG
all parts are fdm-friendly designs
no rafts, no supports, max 45* overhangs, at least 0.2 tolerances for moving objects and screws, already aligned parts for easiest print and best strenght!
basicly put-me-into-slicer-and-print project
brim if you want, I get well results without it
You might eventualy need just a bit of sanding for better fit
| stick.stl | 82.6KB | |
| tripod_bottom_ring.stl | 148.1KB | |
| tripod_foot.stl | 27.0KB | |
| tripod_joint.stl | 47.7KB | |
| tripod_leg.stl | 74.7KB | |
| tripod_top_ring.stl | 167.9KB |
