Self watering Planter with wall mount.
I recommend using a screw with a dowel to ensure a safe usage.
The hole in the mount has a diameter of 4mm.
I used PLA with a 0.2 layer high and support from the bottom plate. (depending on your printer you may not need any support)
more Printing Parameter:
Infill: 15% (40% for the wall mount)
wall count: 2 (3 for the wall mount)
orientation: opening of the pot facing upwards
temperature: 200°C using GeeTech or Maertz Budget PLA
Printing Speed: 50mm/s (wall speed 25mm/s)
Build Plate adhesion: none
The inner pot has a flow-through, so that the plant is watered from below, which benefits many plants.
| Inner_Pot.stl |
| Outer_Pot.stl |
| Outer_Pot_without_wall_mount.stl |
| Wall_Mount.stl |
