This is a self-watering insert for IKEAs FNISS trashcan. It is the ideal size for a planter, and ridiculously cheap. The self-watering insert is printed in 2 pieces, so it should fit in most printers.
Printing:
Total print time was around 10 hours for both parts, printed in 0.28 mm layer height.
I would recommend using a raft when printing the straw. No supports needed on either models
| Self-watering_insert_V2.stl | 362.9KB | |
| Straw_V2.stl | 172.8KB |
