This is a remake of my self-centering z-coupler (http://www.thingiverse.com/thing:396781)
The thread is now optimized for 3D printing and the overall length is way smaller. It's also a parametric design, so i can easily generate different sizes.
I made 4 different sizes for 5mm motor shaft and 5, 6, 8 or 10mm threaded rod.
You can just ask me, if you need different sizes.
12/24/14: Added coupler_5_12, coupler_6_12 and nut_12
10/17/15: Added [V2.5] coupler 6.35/8mm + nuts
12/16/15: Added [V2.5] coupler 5/3, 5/4, 5/7 + nuts
02/04/16: Added [V2.5] coupler 5/6.35
03/12/16: Added [V2.5] coupler 5/5
05/26/16: Added [V2.5] coupler 5/8
| coupler_5_10.stl | 2.4MB | |
| coupler_5_12.stl | 2.2MB | |
| coupler_5_5.stl | 2.3MB | |
| coupler_5_6.stl | 2.3MB | |
| coupler_5_8.stl | 2.4MB | |
| coupler_6_12.stl | 2.3MB | |
| nut_10.stl | 985.2KB | |
| nut_12.stl | 1.1MB | |
| nut_5.stl | 769.5KB | |
| nut_6.stl | 761.8KB | |
| nut_8.stl | 859.2KB | |
| parametric_coupler_4_5-5_0-25mm.stl | 2.8MB | |
| parametric_coupler_4_5-6_35-25mm.stl | 2.9MB | |
| [V2.5coupler_5_3.stl | 2.1MB | |
| [V2.5coupler_5_4.stl | 2.1MB | |
| [V2.5coupler_5_6.5.stl | 2.2MB | |
| [V2.5coupler_5_7.stl | 2.2MB | |
| [V2.5coupler_5_8.stl | 2.3MB | |
| [V2.5coupler_6.35-8.stl | 2.3MB | |
| [V2.5coupler_8_12.7.stl | 2.3MB | |
| [V2.5nut_12_7.stl | 1.5MB | |
| [V2.5nut_3.stl | 913.5KB | |
| [V2.5nut_4.stl | 965.0KB | |
| [V2.5nut_5.stl | 1.5MB | |
| [V2.5nut_6.35.stl | 1.2MB | |
| [V2.5nut_7.stl | 1.3MB | |
| [V2.5nut_8.stl | 1.2MB | |
| [V2.5_coupler_5_6.35.stl | 2.2MB | |
| [V2.5_Kupplung_5_5.stl | 2.2MB |
