Telescope Sefie stick. Nearly 1 metter long.
Important:
In Vasemode, for optimal tight fit, you need about 0.9 mm wall-thicknes.
This can be done for 0.4 mm nozzle by using Extrution Multiplyer= 1.40 and Extrution With = 0.6.
Use also 1 bottom layer and 0 top layer. Remove the bottom layer after printing.
Se picture for Siplify 3D sliser settings for this.
It is important that all RodPart elements has a tight fit.
For other parts (not vasemode), do not overextrude. (Use Extrution Multiplyer= 1.00 and Extrution With = 0.4), othervise the tread may not fit.
All my GoPro related Things:
GoPro Bike and tripod atachment with quick coupling
https://www.thingiverse.com/thing:4570589
Phone stand with screw and GoPro atachment
https://www.thingiverse.com/thing:4328023
Phone Atachment to Bike with spring damper
https://www.thingiverse.com/thing:4458076
Heavy GoPro Base Stand
https://www.thingiverse.com/thing:4693687
Light GoPro Base Stand
https://www.thingiverse.com/thing:4696458
DSLR camera Stand with GoPro atatchment
https://www.thingiverse.com/thing:4424068
GoPro Attachment system
https://www.thingiverse.com/thing:4696725
Ring Light
https://www.thingiverse.com/thing:4696747
Sefie stick. Long. Vasemode.
https://www.thingiverse.com/thing:4678212
GoPro 360 coupling
https://www.thingiverse.com/thing:4697342
| EndCower.stl | 622.0KB | |
| EndNutRing.stl | 854.4KB | |
| EndScrewRodPart.stl | 622.4KB | |
| GPAtachment.stl | 1.1MB | |
| GProdAtachment.stl | 663.2KB | |
| RodPart-01-Screw.stl | 936.7KB | |
| RodPart-02-Vasemode.stl | 29.8KB | |
| RodPart-03-Vasemode..stl | 29.8KB | |
| RodPart-04-Vasemode..stl | 29.8KB | |
| RodPart-05-Vasemode..stl | 29.8KB | |
| RodPart-06-Vasemode..stl | 29.8KB | |
| RodPart-07-Vasemode..stl | 29.8KB | |
| ScrewHead.stl | 431.3KB |
