SeeStar S50 Dew Shield Supporting All-Pixels Masks 3D Printer Model
The file 'SeeStar S50 Dew Shield Supporting All-Pixels Masks 3D Printer Model' is (stl) file type, size is 33.5KB.
The file 'SeeStar S50 Dew Shield Supporting All-Pixels Masks 3D Printer Model' is (stl) file type, size is 33.5KB.
Remix of the Dew shield from SeeStar S50 Accessory Set by Lordwhiteley to support the mask/defraction spike clips from the ZWO Seestar S50 (Lens cap, Levelling pads and accessories set) by All-Pixels.
I'd already printed All-Pixel's kit for a friend and they pointed out that the end of the dew shield was the same diameter as the masks so you couldn't use both at the same time.
Found Lordwhiteley's larger dew sehild and modified the end to take the exisiting printed masks.
Although Lordwhiteley's accessory set includes masks for the dew sheild, they are larger and therefore wouldn't fit in the storage box from All-Pixel's kit, so just done this remix to re-use the already printed kit.
Print Settings:
Quality: 0.2
Infill: 40%
Brim: Yes (Personal Preference)
Supports: Yes (Tree)
Material: PLA
| SeeStar_s50_Dew_Shield_supporting_Masks.stl | 127.6KB |
