I wasn't quite convinced with Ikea's press-fit security fence for their children beds, So I decided to make my own fence out of MDF boards
This thing is a support that is screwed into the fence and into the inside face of the bed to support the fence.
It's designed for a 120mm high / 800mm long / 18mm thick MDF fence (the fence lines up with the outer side of the bed.
Supports are required but the supported surface is hidden after installation.
I would suggest printing with multiple perimeters and top/bottom layers to give the screws an healthy support
| Ikea_slakt_fence_support.stl | 145.5KB |
