Security Camera Ball Mount (3 Sizes) 3D Printer Model
The file 'Security Camera Ball Mount (3 Sizes) 3D Printer Model' is (stl) file type, size is 1.0MB.
The file 'Security Camera Ball Mount (3 Sizes) 3D Printer Model' is (stl) file type, size is 1.0MB.
Update - 2021/01/26: I've added a mini version. It's about 50% smaller than my shorter. It is modified to use a single screw (I used a #6 x 1 in), and includes little wings on the lock nut to make it easier to secure to the wall. The ball also has a Phillips head groove (use PH1) to aid in screwing the ball into the camera.
There are 2 ball stem models:
I modified MatsErik's Arlo mount ball stem to include the threaded screw end for securing to a camera without additional parts.
I have also shortened the rest of MatsErik's components to reduce the total length of the mount by 17.5mm.
I specifically printed this as a better mount (higher degree of adjustment) for my Ubiquiti Unifi G3 Instant camera, but this could be used for any camera supporting a standard 1/4" tripod mount.
| MiniMount-BallWithScrewHead-LongStem.stl | 206.4KB | |
| MiniMount-BallWithThreadInsert.stl | 208.6KB | |
| MiniMount-BasePlate.stl | 173.5KB | |
| MiniMount-LockNutWings.stl | 150.7KB | |
| MiniMount-SocketCollar.stl | 76.1KB | |
| OriginalMount-Ball.stl | 195.6KB | |
| OriginalMount-BasePlate.stl | 457.8KB | |
| OriginalMount-LockNut.stl | 340.7KB | |
| OriginalMount-SocketCollar.stl | 57.9KB | |
| ShorterMount-Ball.stl | 203.4KB | |
| ShorterMount-BallWithThreadInsert.stl | 172.3KB | |
| ShorterMount-BasePlate.stl | 177.8KB | |
| ShorterMount-LockNut.stl | 133.5KB | |
| ShorterMount-SocketCollar.stl | 76.4KB |
