SECTION 1 WITH WORKING DIVE PLANES 3D Printer Model
The file 'SECTION 1 WITH WORKING DIVE PLANES 3D Printer Model' is (stl) file type, size is 57.2KB.
The file 'SECTION 1 WITH WORKING DIVE PLANES 3D Printer Model' is (stl) file type, size is 57.2KB.
This is the forward (bow) section of the bathtub u boat submarine designed originally by SKIMBAL. I resigned it so that i could create a working radio control submarine with working dive planes. This redesign is intended to be printed in place. I am printing my model at 200 percent so the finished model will be approximately 76 inches in length.
I removed the anchor parts because they don't print well without supports. I plan on posting a remake of those parts separately. A much cleaner version can be achieved by printing these parts flat and then attaching them by using an adhesive.
You will need to remove the built in supports at the bottom(rear) portion of the planes.
| SECTION_1_WITH__WORKING_PRINT_IN_PLACE_DIVE_PLANES_fixed.stl | 153.6KB |
