This is a collection of parts required to set up a dual hose air conditioning unit based on the Comfee (aka Midea) MPPH series. In particular it was tested on MPPH-08CRN07 model.
The collection contains a hose tip from https://www.thingiverse.com/thing:4582282 which did not fit the adapter from the same set, therefore I designed other parts myself. Most of them do not require supports to print, however you'd need a glue, some screws and nuts, as well as a sealing tape (sticky foam) to assembly it.
For the second hose I used that one: https://www.amazon.de/-/en/dp/B0BYYPQQ2Z , which appears to be very similar to the original one.
| compliant-lock.stl | 143.5KB | |
| funnel.stl | 941.3KB | |
| hose_tip.stl | 54.0KB | |
| intake-box-adapter.stl | 569.1KB | |
| intake-box-btm-left.stl | 325.5KB | |
| intake-box-btm-right.stl | 355.4KB | |
| intake-box-top-left.stl | 332.1KB | |
| intake-box-top-right.stl | 362.0KB | |
| wall-terminal.stl | 887.1KB |
