Seashell Ocean Life Drawer Pulls 3D Printer Model
The file 'Seashell Ocean Life Drawer Pulls 3D Printer Model' is (stl) file type, size is 6.1MB.
The file 'Seashell Ocean Life Drawer Pulls 3D Printer Model' is (stl) file type, size is 6.1MB.
Drawer pulls I remixed together to match a beach themed bathroom.
I rotated them hole down so the supports would be on the back side of the shells where you wouldn't really see them once they were installed.
As they are designed I predrilled the holes after printing with a drill bit smaller than the screws I used to mount them. I ended up using simple deck screws. You just want to size them appropriately for the thickness of the doors or drawers your installing them in.
I printed these with the Wall Line Count in Cura set to 4 to give the screw threads more to hold on to. I put a lot of effort into painting them so if I was doing it again I would probably just do 100% infill or even more wall lines.
Painted them with filler primer, titanium white acrylic, and clear glaze spray.
Water thinned washes of black, burnt sienna, and burnt umber.
Finished with a few final coats of clear glaze spray.
| ConchShell_Knob_LH.stl | 1.1MB | |
| ConchShell_Knob_RH.stl | 1.1MB | |
| Seashell_Knob_LH.stl | 825.8KB | |
| Seashell_Knob_RH.stl | 825.8KB | |
| SeaTurtle_Knob_LH.stl | 4.2MB | |
| SeaTurtle_Knob_RH.stl | 4.2MB |
