Sealant Cartridge Tips (Nozzles) Customisable 3D Printer Model
The file 'Sealant Cartridge Tips (Nozzles) Customisable 3D Printer Model' is (stl,scad) file type, size is 5.0MB.
The file 'Sealant Cartridge Tips (Nozzles) Customisable 3D Printer Model' is (stl,scad) file type, size is 5.0MB.
This is mostly inspired by The-Mechanic design, not a remix.
I have used the original to print some nozzles when repaired the yacht.
Then I have to create several other tips. As the result I have got some project which can be further extended. I have added scad file, so it should be possible to add some more special tipps. Hope there are enough comments in scad file to make the design easy.
I have printed those nozzles in PETG, but it can be easy adjusted for PLA or some other.
PETG versions of nozzles have slightly wider internal holes.
You will need to have threads.scad file in your OpenSCAD library. It can be downloaded from here: https://dkprojects.net/openscad-threads/
| BigCapPETG.stl | 829.5KB | |
| BigCapPLA.stl | 829.3KB | |
| ComplexTipOpenedPETG.stl | 1.6MB | |
| ComplexTipOpenedPLA.stl | 1.6MB | |
| ComplexTipPETG.stl | 1.6MB | |
| ComplexTipPLA.stl | 1.6MB | |
| LittleCapPETG.stl | 867.9KB | |
| LittleCapPLA.stl | 850.1KB | |
| LittleCoverPETG.stl | 880.0KB | |
| LittleCoverPLA.stl | 861.2KB | |
| NarrowTipPETG.stl | 880.1KB | |
| NarrowTipPLA.stl | 862.0KB | |
| SealCartTips.scad | 3.9KB | |
| SimpleTipPETG.stl | 839.3KB | |
| SimpleTipPLA.stl | 838.9KB |
