Seal Line Strap Clip V3 3D Printer Model
The file 'Seal Line Strap Clip V3 3D Printer Model' is (stl) file type, size is 38.2KB.
The file 'Seal Line Strap Clip V3 3D Printer Model' is (stl) file type, size is 38.2KB.
This is the third version of the strap clip I published to use on my Seal Line backpack. I wanted a clip to hold the loose end of the strap to the fixed end on the waist belt. I have used V3 for a few months now. This revision is solid. I have yet for the two straps to separate.
Printer: Metal Printrbot Simple
Resolution: 0.25mm layer height
Filament: 1.75mm Metallic Midnight Blue PLA
What I learned from V2:
The opening for both the rear and front strap in the same place proved to be problematic. The overall thickness was also a problem for my old printer and it was very brittle. The strap would slip out occasionally.
What I learned from V1:
The overall thickness was unnecessary for holding the strap together. For this reason I wanted the for the slimmer profile. It helped reduce material, but at the same time increased printing accuracy. I also found I needed a different way to insert the strap. The strap would slip out quite often. I found inserting both straps from the same side with a divider worked much better. Only one strap can enter or exit at a time because of the center divider.
| SL_strap_clip_V3.stl | 95.2KB | |
| SL_strap_clip_V3_Thick.stl | 87.0KB |
