The file 'Sea Of Thieves Collector’s Chest 3D Printer Model' is (sldprt,step,stl,zip) file type, size is 481.5KB.
Finally a SOT chest in easy filament printable design!
CAD files included so you can add your own variation.
Designed for filament printability:
-Smooth flat bottom for strong buildplate adhesion
-Limited overhangs wherever possible to 60 degrees
-Solid, watertight model without errors
-Does NOT open
-NO booty inside :-(
Recommended Slicer settings:
-2 walls/shells, Inside to Outside
-Z Seam: Sharpest corner, Hide
-4 Top layers, 3 Bottom
-Travel: Not On Outer Surface
-Concentric top/bottom layer pattern
-Infill: 15%, Grid Pattern, Gradual infill steps = 2, Gradual infill step height = 5mm
-Infill: Skin Edge Support Layers = 2
-Experimental (At least in Cura): Make Overhangs Printable, Maximum Model Angle = 60 degrees
Scaling larger should not be a problem as it's 1 piece
| CHEST.sldprt | 217.0KB | |
| CHEST.step | 862.1KB | |
| CHEST.stl | 276.7KB | |
| CHEST.zip | 65.6KB |
