SdKfz 250 Neu 3D Printer Model
The file 'SdKfz 250 Neu 3D Printer Model' is (stl) file type, size is 16.9 MB.
The file 'SdKfz 250 Neu 3D Printer Model' is (stl) file type, size is 16.9 MB.
The German light half-track SdKfz 250 neu took over in production from the previous model from October 1943 until the end of the war. The standard 250/1 and most variants were given to reconnaissance units (Panzer Aufklärungs) working with the Panzer and Panzergrenadier divisions.
This is a remix adding extra detail and will be added to with other versions in the series and uses :- M-Bergman's 1:100 SdKfz 250B, 1:100 SdKfz250A and various parts from TigerAce1945's SdKfz 251 series.
Some of the pictures above show the changes made to the original M_Berman models highlighted in white or a different shade.
Version 250/1 added! 24/06/2018
AA arm or AA arm with MG42 can be glued to the rear of the fighting compartment!Version 250/7 added! 27/06/2018
I've made the mortar separate to make printing easier, it can be glued into place along with the AA MG or AA armVersion 250/9 added! with 2 turrets the original and one with more detailed weapons
Version 250/10 added 04/07/2018
Original shield but gun from TigerAce1945's SdKfz 251/10
Added original M_Berman pak 36 as alternative!
Replaced both guns with new ones with extra detail, (rivets & shield spacing)Version 250/8 added! 15/07/2018
Original 7.5cm gun but added detail to barrel and MG42 from TigerAce1945 SdKfz 251
Simple gun & MG42 added also.Version 250/3 added! 30/07/2018
This is the command version with extra radio equipment.
I've included the star antenna, I'll probable attach this by drilling out the bottom and adding a piece of wire then gluing it in place.
With larger scales you could use small rare earth magnets to keep it in place.
The other antenna on the right side can be made using wire or a bristle from a nylon brush and glued in place.I think this completes my extension of Mr Bergmans range of SdKfz250 neu vehicles!
I wargame in 1/144th scale so all my models are in this scale but it's fairly easy to up-scale to what ever you want.
I haven't printed this yet!
I usually get my things printed commercially in resin.
| 144_8cm_mortar-1.stl |
| 144_Sdkfz_250-7.5cm_gun-B8-1.stl |
| 144_Sdkfz_250-7.5cm_gun-with_simple_mg42_B8-1.stl |
| 144_Sdkfz_250-B10_mid_no_bin-body_only_1.stl |
| 144_Sdkfz_250-B10_original_pak_36_with_rivets_1.stl |
| 144_Sdkfz_250-B10_pak_36_with_rivets_1.stl |
| 144_Sdkfz_250-B1_AA_arm_1.stl |
| 144_Sdkfz_250-B1_AA_arm_with_mg42_1.stl |
| 144_Sdkfz_250-B1_body_only1.stl |
| 144_Sdkfz_250-B1_mg42_only_1.stl |
| 144_SdKfz_250-B3_1.stl |
| 144_SdKfz_250-B3_star_antenna_only_1.stl |
| 144_Sdkfz_250-B7_mortar_removed-1.stl |
| 144_Sdkfz_250_body_only-B8-1.stl |
| 144_Sdkfz_250_body_only-B9-1.stl |
| 144_Sdkfz_250_simple_turret-B9-1.stl |
| 144_Sdkfz_250_turret-B9-1.stl |
