A simple design of the SD card organiser.
The organiser was prepared in two versions:
It has 6 slots for SD cards or adapters for micro, mini and RS / MMC cards (Reduced Size, used eg in Nokia 6630, they are the size of half of the SD card).
Inserting and removing cards is quick and easy. In addition, the micro SD card (I had no way to check it with mini) can be pulled out without removing the adapter.
In the case of printing the organiser in parts, you need to print:
Parts with the Top name should be inserted into the grooves of the Bottom part. If necessary, sand it with sandpaper, or stick with glue. A good solution is also to slide them from the side.
| SD_Card_Organiser_Bottom.stl | 60.5KB | |
| SD_Card_Organiser_Complete.stl | 70.9KB | |
| SD_Card_Organiser_Top_Center_x1.stl | 684.0B | |
| SD_Card_Organiser_Top_Sides_x2.stl | 684.0B |
