I couldn't find an SD card holder design that stores both Micro and Full size cards so I decided to make one myself.
A very simple design, just a body and a lid. It holds 10 micro SD cards and 4 full size cards (works for adapters too). You can wrap around the box with a small rubber band for travelling, the cut-out helps prevent the rubber band form slipping.
It's got my forum logo: http://IntoFPV.com
Visit my website: https://oscarliang.com
Ultimaker 2+
Polymaker PLA
In-fill density 20%
0.4mm nozzle
I have been told the slots for micro SD cards are too tight.
I made them just right for my printer, and there could be a tolerance difference between our printers since those gaps are so tiny. If it's too tight for you, just get a small file and slide it in and out of the slot against the ends a couple of times. That should fix it :)
I didn't want to make the slots too large so the cards won't fall out too easily :) If you don't mind that and don't have a file, just scale it up a tiny bit before printing :)
| body-v1.stl | 4.5MB | |
| lid-v1.stl | 1.6MB |
