Holder for SD cards and microSD adapters made in Zippo style.
The container has 4 card slots.
When opened, the cards rise up in steps.
Assembly.
The holder consists of 5 parts.
First install all the internal elements, then install the side wall. The side wall is attached using regular filament (the holes for the filament are 1.8mm). I also used glue.
3D printing settings
All models are already rotated for optimal printing.
I printed PETG;
layer height 0.2mm;
3 walls;
filling 10%;
all parts are printed without supports;
The Cap part must be printed with supports.
| cap.stl | 546.4KB | |
| main_body.stl | 69.6KB | |
| rail.stl | 52.4KB | |
| shift_part.stl | 42.1KB | |
| wall.stl | 48.1KB |
