This BattBlox was made for memory card storage, but BattBlox was designed originally as a universal battery holder that can be configured to hold most common battery styles. I have posted several design configurations for several battery sizes. Request other sizes and I'll add them. BattBlox is a standard 100mm deep x various sizes to suit the battery sizes as needed. Variations in item sizes have been taken into account to ensure ease of use. The 'Blox' (blocks) snap together to build larger configurations with the 'key' file or can be used as is. Use the 'filler' piece for the ends or if used singley if you don't want to see the keyway. Note that they are two sided. One side is labeled with the battery type, the other is a rounded over plain style. They are symmetrical about the centre so can be used in one orientation or a mix of both. Holes go through the base and are for keeping dust out of the bottom of slots and to make it easier to clean them.

SD BattBlox is designed for memory storage. This 'blox' has been made to keep 20 SD's, 13 micro SD's and 4 USB thumbdrives. Additional Blox can be added as needed. In my case, I have made some in red and some in green. Full memory devices are put in the red Blox, and once the files are uploaded to my hard drive or computer, they go in the green Blox ready to use.

All my posted designs are 100% ready for prime time and have been printed/refined several times with different settings to make sure you'll have a good print. Openings are purposefully generous so you never had to fight using this, even if your printer is off a little. I hope that if you take the time to read this and download, you'll post a make or comment :)