A scythe with blade length of 48 cm in my Love Your Enemies project.
Blade part 1 has 3 variations: Clean, Love or REPAER.
Blade part 2 has 2 variations: Clean or REPAER.
The length of the handle is 65 cm and can be made longer in 22 cm steps by using several middle sections.
Note: Middle section is not symmetric. The holes are not equally deep. Make sure to glue the halves together correctly. Before joining the middle section with other parts, test that the plugs fit. If not, turn the middle section around.
The blade and the handle are intended for push-fit. If they are loose, apply some tape or cloth or paper or whatever filling you find usable.
The REPAER blade is my humble tribute to REDRUM in Kubrick's movie Shining. If you see someone with this blade, do not look into mirror!
| blade-1-clean.stl | 1.3MB | |
| blade-1-love.stl | 1.8MB | |
| blade-1-reaper.stl | 3.4MB | |
| blade-2-clean.stl | 981.4KB | |
| blade-2-reaper.stl | 1.3MB | |
| blade-3.stl | 981.3KB | |
| handle-bottom-1.stl | 1.2MB | |
| handle-bottom-2.stl | 1.1MB | |
| handle-mid-1.stl | 574.6KB | |
| handle-mid-2.stl | 531.4KB | |
| handle-top-1.stl | 700.5KB | |
| handle-top-2.stl | 2.5MB | |
| plug-blade-1.stl | 142.9KB | |
| plug-blade-2.stl | 65.7KB | |
| plug-handle.stl | 326.4KB |
